Metz mecablitz 58 AF-1OP Flash Unit Get Metz 58 AF-1OP Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet etailer for Metz and Many Other Fine Brands!

It looks sleek, meters flash lighting every which way, is intuitive to use and tremendously powerful. Designed by one of the leading industrial designers for technical products in Germany, the Metz mecablitz 58 AF-1 digital provides state-of-the-art secondary reflector technology, high-performance power management, the latest generation multi-zone AF metering flash, full vertical tilt reflector system, the latest special functions, USB interface for software updates via Internet, and lots more. The premium Metz model 58 AF-1 OP digital is the ideal complement to Olympus and Panasonic cameras. The 58 AF 1 OP digital supports FourThirds System TTL flash control.

With its high guide number 58(m) / 190(ft) at ISO 100/21° and 105mm focal length, the 58 AF-1 digital is not only powerful, but can also be used for excellent indirect flash lighting. Marking a first at Metz, a foldaway reflector card was integrated for its vertical and horizontal swivel-and-tilt reflector. Using the secondary reflector, additional brilliance in the close-up range can be achieved with this flash technology. At the same time, a particularly complex reflector technology enables even partial light output without additional filters! The high-performance Power Pack P 76 is available for the 58-AF 1 digital. It allows a substantially higher number of flashes with reduced flash recovery time (rapid flash) when used in conjunction with the V 58-50 cable.

Metz mecablitz 58 AF-1OP Flash Key Features

Dedicated FourThirds System Flash Functions Including TTL Flash Control and High Speed Synchronization (HSS)

The compact and powerful Metz 58AF-1OP has been specifically designed for Olympus and Panasonic cameras, in particular their FourThirds System digital SLRs. The supported flash functions depend on the specific camera model used. The following dedicated flash functions are supported by the flash unit:

• Flash-ready indication in camera viewfinder/camera display
• Automatic flash sync speed control
• FourThirds System compatible
• Automatic flash / triggering control
• TTL with measuring preflash
• Automatic fill-in flash control
• Manual flash exposure correction for TTL
• 1st or 2nd curtain synchronisation (2nd curtain, SLOW2)
• FP high speed synchronisation (HSS) with TTL and M
• Automatic motor zoom control
• Automatic AF measuring beam control (multi-zone AF measuring beam)
• Automatic flash range indication
• Programmed flash mode
• Preflash function for reducing the red-eye effect
• Wireless TTL remote flash mode
• Wake-up function for the flash unit

USB Interface

Guide Number 190 (ft) / 58 (m)

Guide Number 190 (ft) / Guide Number 58 (m) at ISO 100 at 21°C and 105mm focal length.

Firmware Updates Via USB Interface

This is the first compact flash unit with a USB socket. With this popular PC interface, updates can be made via the Internet at any time, even from home. The flash unit's firmware can be updated through the USB port and adjusted to the technical requirements of future cameras.

Swivel and Tilt Main Reflector For Indirect Flash Lighting

The main reflector of the flash unit can be swivelled 270° horizontally and tilted vertically for bounce flash. The zoom reflector can be tilted upwards into four locking positions for bounce flashes: -7°, 60°, 75° and 90°.

Integrated Reflector Card

Integrated Reflector Card For Main Reflector and Secondary Reflector With Two Light Output Levels

The use of bounce flash with the integrated reflector card can bring out highlights in the eyes of human subjects. When the main reflector is swivelled or tilted, the secondary reflector can also be activated for frontal fill-in lighting of the subject. When the secondary reflector is activated, approximately 85% of the light from the flash unit will be reflected by the main reflector and approximately 15% by the secondary reflector. These values may vary somewhat when the flash is used with partial light output levels. If the light from the secondary reflector is too bright, it can be reduced by half in the Select Menu. Full secondary reflector support is available for dedicated flash modes.

Automatic / Manual Reflector Motor-Zoom Control

Automatic motor zoom reflector with 7 lock-in positions: 24/28/35/50/70/85/105mm (35mm format). The integrated zoom reflector guarantees optimal light output within 24-105mm focal length. If the 58 AF-1OP is used with a camera that transmits lens focal length data to the flash unit, the zoom reflector position of the mecablitz is automatically adjusted to the focal length of the lens in use. The LCD display then indicates "A-Zoom" (Auto Zoom) and the zoom reflector setting (mm). The zoom position can also be set manually.

Integrated Wide-Angle Diffuser

For lenses with focal lengths of 18 mm or more, the integrated wide-angle diffuser can be positioned over the main reflector. When using the wide-angle diffuser, the main reflector is automatically moved to the 24mm position and 18mm appears on the display as the zoom reflector setting.

Automatic Flash Mode With 12 Tele-Computer Apertures

A photo-sensor measures the light reflected by the subject and ends the light output as soon as the subject has been correctly lit. The 12 auto apertures at ISO 100/21° are f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22, f/32 and f/45.

Manual Flash Mode With 25 Partial Lighting Levels

Full light output and 25 partial light output levels available.

Illuminated LCD Display

Flash mode, maximum flash range, aperture and the zoom reflector position are all indicated by the LCD display of the flash unit.

Auto Off

To save battery power and prevent inadvertent battery discharge, the mecablitz is factory-set to automatically switch to standby mode (Auto-OFF), while the flash-ready light and the indications on the LC display are extinguished, approx. 3 minutes after:

• switch-on
• triggering a flash
• activating the shutter release
• switching off the camera's exposure metering system

After automatic switch-off the last-used settings are retained and instantly available when the flash unit is switched on again. The flash unit is reactivated merely by depressing the Mode or Zoom keys or by touching the camera's shutter release. The Auto-OFF function can be deactivated whenever required.

Flash Readiness Indication

Correct Exposure Indication

In auto flash mode the "o.k." correct exposure confirmation briefly lights up on the 58 AF-1OP when the picture was correctly exposed.

Manual Key-Lock Function

The Key-Lock function enables the user to lock the buttons on the flash unit to prevent them from inadvertently being pressed.

Wireless Remote Flash Mode

Wireless remote operation is compatible with the Canon E-TTL remote system. The remote system consists of a master flash unit on the camera and one or more slave flash units. The slave flash unit(s) is/are triggered by wireless remote control by the secondary reflector of the master flash unit. The light of the secondary reflector does not contribute to the exposure of the shot in this case.

Modelling Light

The modelling light is a sequence of stroboscopic flashes at high frequency for a duration of approximately 3 seconds which give the impression of permanent light. Modelling light enables the user to assess light distribution and shadow formation before taking pictures.

Cobra Design

The mecablitz 58 AF-1OP utilizes Metz' modernistic upright Cobra design, which also reduces red eye effect.

Metz mecablitz 58 AF-1OP Specifications

Flash Output Guide Number

GN 58 (m) / GN 190 (ft) (ISO 100/21°C) and 105mm focal length
GN 42 (m) / GN 138 (ft) (ISO 100/21°C) and 50mm focal length

Power Sources

Four AA batteries: alkaline or lithium
Four AA rechargeable batteries: NiMH or NiCad
Optional external power supply: Power Pack P76

Recycle Time (at Full Light Output)

Approx. 5 seconds with high-capacity alkaline manganese batteries
Approx. 2.5 seconds with Power Pack P76 (optional accessory)

Tilt Reflector Range

Vertical: 60°, 75°, 90°, 0°, -7°

Number of Flashes (at Full Light Output)

Approx. 180 with 1600 mAh NiMH batteries
Approx. 180 with high-capacity alkaline manganese batteries
Approx. 430 with Metz Power Pack P76 (optional accessory)

Auto Apertures At ISO 100/21°

f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22, f/32, f/45

Manual Partial Light Output Levels

1/1 to 1/256 light output, in one-third increments

Sensor Measuring Angle

approx. 25°

Color Temperature

5600° K

Film Speed

ISO 6 to ISO 6400

Light Coverage

Main reflector from 24mm (35mm format)
Main reflector with wide-angle diffuser from 18mm (35mm format)
Secondary reflector from 35mm (35mm format)

Reflector Swivelling Ranges and Locking Positions

upwards -7° 45° 60° 75° 90°
counter-clockwise 30° 60° 90° 120° 150° 180°
clockwise 30° 60° 90° 120°

Weight

12.5 oz. (355g)

Dimensions(W x H x D)

2.8" x 5.8" x 3.9" (71 x 148 x 99mm)

Back to Metz Flash Units