 Email Us
© 2008
Video Direct® |
Manfrotto Video Camera Remote Controls
Video Direct has been an authorized Bogen dealer for many years, and thus also an authorized U.S. retailer for many of the biggest names in the business. These include Manfrotto Video Camera Remote Controls.
Manfrotto video camera remote control units put the essential commands of market-leading video cameras from Sony, Canon and Panasonic at your fingertips when using a tripod and video head, a jib arm or crane, or any other kind of camera support. The range is divided not only by camera compatibility (due to different use of device protocols by manufacturers, each model has to be designed around specific makes or models of camera), but also by mounting type. The 523PRO has built-in video head pan bars making them most suitable for use in classic tripod/head setups. The 521 models are built onto clamps, enabling them to be used on tubes, pipes, table tops, steering wheels, handlebars, hang-gliders or even to be hand held for ultimate freedom in control.
Pan bar mounted versions offer the advantage of allowing you to operate both camera movement and many recording/zoom controls with the same hand, letting you take care of creative decisions rather than having to worry about how to reach the camera buttons, follow the subject and keep movements smooth all at the same time. Clamp versions reduce the number of buttons and controls to the bare minimum, but where you use them is limited only by your imagination!
|
|
Shop With Confidence!
Video Direct® is an Authorized U.S. retailer for Manfrotto
and Many Other Fine Brands!
|
 Shop Manfrotto Video Camera Remote Controls
Manfrotto Video Camera Remote Controls
Using the same popular pan-handle design of the 523PRO and 522P remotes, the 524CFi is a pan bar-mounted remote control unit for Canon and Fujinon video camera lenses with intelligent circuitry and programming to differentiate between the two. The 524CFi offers an easy to operate progressive zoom, record/stop and RET (return - plays back last 3 seconds of footage then stops at the last recorded frame ready to record again). The red dial allows you to quickly and easily limit the maximum zoom speed to avoid overly fast transitions while the zoom direction switch lets you change from left-right to right-left zooming.
Manfrotto is proud to introduce a new range of zoom remote controls dedicated to the professional ENG lens market. Using the same popular pan-handle design of the 523PRO and 522P remotes, Manfrotto now offers the new 524AX Zoom Remote Control For Angenieux ENG Lenses. The 524AX remote comes with a built-in 90cm 8-pin cable to automatically adapt to the 8-pin connection found on most analog ENG lenses.
The 523PRO remote control works with both Sony and Canon LANC-enabled video cameras. The remote control features a record/stop button, a power on/standby button, three different zoom speed control buttons (slow, medium and fast) and a push auto focus button.
The Manfrotto 522P is a dual circuit, progressive zoom remote control unit for the Panasonic AG-DVC-30, AG-DVC80 and AG-DVX100A. It is built into a video head pan bar that is suitable for Manfrotto models 3433, 3460, 516 and 3274.
The 521CFi puts all the functions of the 524CFi in a smaller clamp control suitable for use with the 595B Fig Rig, with jib arms and in a wide variety of other shooting setups. This allows the video operator to take full advantage of the latest compact HD camcorders with interchangeable lenses. The 521CFi offers an easy to operate progressive zoom, record/stop and RET (return - plays back last 3 seconds of footage then stops at the last recorded frame ready to record again). A small side-mounted dial allows you to quickly and easily limit the maximum zoom speed to avoid too-fast transitions while the zoom direction switch (also on the side of the unit) lets you change from left-right to right-left zooming.
Designed for Sony and Canon Mini DV and Hi8 cameras, the Manfrotto 521PRO is a compact remote control that is built onto a small clamp to suit a wide range of applications. The 521PRO enables you to control power, recording, zoom and focus.
Designed for Sony and Canon Mini DV and Hi8 cameras, the Manfrotto 521 is a compact remote control that is built onto a small clamp to suit a wide range of applications. The 521 allows you to control the most commonly used features of your camera: power on/off, record/stop, focus in/out and zoom through the professional zoom wheel.
The 521P is designed to work with Panasonic cameras AG-DVC30, AG-DVC80, and AG-DVX100A, and enables you to control the record/stop,and zoom in/out functions of the camera. The 521P can be used for a wide variety of applications. It can be mounted to a huge range of supports, such as pipes, bars, tubes, and flat surfaces.
| |
