KATA Carrying Solutions
KATA designs, develops, and manufactures quality, state-of-the-art protection solutions and carrying systems. Kata's products are designed around the human frame. It's not enough that the equipment fit the case, the case must also fit the user!
KATA established its reputation by outfitting Military and Security Special Forces with auxiliary cases, utility and protective vests and backpacks. Tough, durable, yet remarkably lightweight, Kata products are constructed to withstand rough treatment and harsh conditions over long periods.
 Shop KATA Camera Cases Online
|
|
Shop With Confidence!
Video Direct® is an Authorized U.S. retailer for KATA
and Many Other Fine Brands!
|
KATA Large Camera Carring Cases and Shoulder Bags
The KATA CCC-1A is designed to hold medium to large pro camcorders with the battery and lens installed. It can also hold medium-sized pro camcorders such as the Canon XL-1/XL-1s/XL-2 with the battery and lens installed and many accessories. Engineered to embody the perfect balance, the CCC-1A is an extremely lightweight yet highly protective case. The streamlined ergonomic shape keeps the center of gravity close to your body, and eases the burden when carrying. The double flap top opening ensures quick access to the top grip handle of the camcorder. Included dividers and support cushions enable customization of the interior space to meet specific needs. Additional storage is available in two large padded pockets front and rear, one flat internal pocket and two flat pockets along the side. A designated tripod plate pouch can be found inside the main compartment, and a small set-up card pocket is integrated in the top flap. For safe and easy car transport, dedicated seat belt securing slots are sewn into the handle straps on the left side. Carrying options include built-in interlocking handles and the included Advanced Padded Shoulder Strap. KATA's Insertrolley is an available accessory.
Internal Main Compartment Dimensions: 27.2"x 11.4-7.4" x 11-9.8"
KATA's TCCT meets the strict new airline regulations for carry-on bag size. And its modularity means that when you land it adapts to hold your fully assembled camera in everyday use. Once you land, you can expand the case to its working position. The TCCT has a compartment that lengthens the case and a side compartment that makes it wider. Like the turtle's shell, the case and the extended compartments are padded and rigid at the same time, to protect their delicate contents. The detachable trolley (included) makes it easier to transport the bag through the airport.
Internal Main Compartment Dimensions: 22.4-28.45" x 7-9" x 13.4"
The KATA Banana-3 is a heavy-duty production case built to hold lots of equipment -- large and small. The Banana-3 is also perfect for medium and large format out of studio photography. A unique (patent-pending) contoured shape that keeps the weight close to your body makes it easier to carry. The Banana-3 is designed so that its opening faces toward your body when carrying the bag on your shoulder, allowing you to easily view of its contents and access your gear. Thick padding and reinforcing, with plastic boards and aluminum staves, protect your equipment. KATA's Modi-Vers modular divider system enables customizing the bag to your specific needs.
Internal Main Compartment Dimensions: 23.6" x 11.8"-9.5" x 11.8"
The KATA CB-400 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Sony EX-3, the Canon XL H1, JVC's HD Series and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap, allowing immediate access to your accessories. The snuggly-protected camcorder compartment is located beneath. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 24.8" x 11.4" x 10.8"
The KATA Pro-Light FlyBy-76 PL is a sleek, low profile on-board professional organizer designed to provide the best traveling, storage and working solutions. Lightweight and protective, it will cater to the smallest detail of a professional's working needs. The spring-steel Spine Guard, encased in specially-formed foam, provides ultimate structural protection. TST-reinforced corners, light yet durable RipStop fabrics and meshes, Aeriform foams, Honeycomb panels and Spider Webbing straps all join together to create an extremely protective but light case. The fantastic modularity allows you to make it even lighter by simply removing components that are not necessary for your everyday work.
Internal Main Compartment Dimensions: 20.5" x 13.0" x 8.7"
The KATA Pro-Light FlyBy-74 PL is a sleek, low profile on-board professional organizer designed to provide the best traveling, storage and working solutions. The main compartment will protect and organize a large amount of gear such as one or two Digital SLR camera bodies with six to eight lenses (up to 400 mm), flash and many other photo accessories. Use the numerous modular Aeriform Dividers to custom fit your exact gear needs. Along the back panel is a full-length Elasto-Guard 15.4-inch laptop compartment which when not in use just flattens out of the way. Travel documents and personal effects can be stored in the front flat external pocket. Tripod connecting straps can be attached to the front of the case. Carrying options include vertical and horizontal handles, KATA's GSS Gecko Shoulder Strap and the included Insertrolley for wheel-along transportation.
Internal Main Compartment Dimensions: 17.3" x 12.6" x 6.7"
The KATA CB-300 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Sony PMW-EX3, the Canon XL H1 and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap, allowing immediate access to your accessories. The snuggly-protected camcorder compartment is located beneath. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 20.9" x 11.2" x 10.8"
The KATA CC-197 Camera Shoulder Case is a compact, TST padded case designed to hold a range of DV and HDV camcorders. The CC-197 fits camcorders up to the size of the Canon XL H1 or the JVC GY-HD100/110/200/250 with accessories and mounted mattbox. The CC-197 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF). Additional accessories will fit in the remaining space of the main compartment, and the additional full-length interior compartment or the full-length external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. The CC-197 lid is secured by a quick closure buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the supplied padded shoulder strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 26.4" x 11.4" x 11"
The KATA CC-196 Camera Shoulder Case is a compact, TST padded case designed to hold a range of DV and HDV camcorders. The CC-196 features ultimate protection and portability for medium-sized digital camcorders such as the Sony EX3, Canon XL H1 or JVC GY HD Series with accessories and mattbox. The CC-196 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF). Accessories will fit in the modular main compartment with the camera, in the additional long compartment or in the full-length external pocket. Internal dividers are included.
Internal Main Compartment Dimensions: 23.6" x 11.4" x 11"
The KATA BJB-007 is the bag for the undercover cameraman who has to be discreet and effective. Under the guise of a straightforward shoulder bag hides a secret compartment which will house a compact HDV camcorder while the "one way view" side panel will allow you to get footage without being detected. External side access allows easy adjustments and operation of your camera and the stable shoulder strap provides excellent balance when carrying and when shooting. When not on assignment the bag will easily convert to an everyday satchel.
Internal Main Compartment Dimensions: 14.6" x 3.1" x 10.2"
The KATA Banana-2 is a professional photographer's roomy shoulder bag and a heavy-duty production case built to hold lots
of equipment -- large and small. A unique (patent-pending) contoured shape that keeps the weight close to your body makes it easier to carry. Carrying options for the Banana-2 include a shoulder strap, KATA's unique patented interlocking handles or two side grips. The Banana-2 is designed so that its opening faces toward your body when carrying the bag on your shoulder, allowing you to easily view of its contents and access your gear. The main compartment and the external and internal pockets will store 2-3 digital SLR bodies with their lenses attached, 4-6 additional lenses and many more accessories, from small media cards to a field tripod.
Internal Main Compartment Dimensions: 21.7" x 11" x 10.6"
The KATA CB-200 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Panasonic AG-HVX200, AG-HPX170 and AG-HMC150, the Canon XH A1s and XH G1s, the Sony HVR-V1, HVR-Z1, HVR-Z5, HVR-Z7 and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap. The snuggly protected camcorder compartment is located beneath so when you are out and working the access to your accessories is rapid and immediate. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 17.7" x 10.0" x 9.6"
The KATA PR-460 Photo Reporter shoulder bag was created for the reporter on the move, ready to grab and go at any moment. It provides easy accessibility to your gear, keeping you ready to capture that split-second shot. The PR-460 fits 2-3 digital SLR bodies and 4-5 lenses (up to 300mm) plus accessories and a laptop up to 15 inches. Customize the internal compartment with the modular dividers while an internal removable pad lets you define the rigidity of the bag, allowing you to either leave in for a more protective bag or to take out to make the bag more compactness in tight situations. A top access opening allows you to easily reach your equipment from the top of the bag without having to open the entire bag. The quick release buckle lets you easily access all your gear within the bag.
Internal Main Compartment Dimensions: 13.4" x 6.3" x 9.8"
The KATA D-Light Capsule-185 DL is stylish, functional lightweight, protective case which is designed to carry camcorders such as the Sony PMW-EX3, the Canon XL H1, JVC's HD Series and similar. A TST RIB running down the middle of the bag and an Aluminum Skeleton stave which arcs across the mid section provide structural protection while light yet durable RipStop fabrics, Honeycomb Panels and Aeriform foams join together to create a lightweight protective compact case. The included Lens Pillow fits snugly under your lens to perfectly stabilize your camcorder. A Rain Cover is also included for protection in rough weather conditions. Carrying options include an interconnected 3 handle and 1 shoulder strap system, while Insertrolley connection is available for wheel-along transportation (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 19.7" x 11.8" x 9.8"
The KATA ABS-HD Air Bag System is the perfect protective solution for globe trotting camcorders and cameramen. Forget about fighting to get your camcorder bag on board with you, Say farewell to the days of wrapping up your camcorder in blankets and hoping that the other suitcases up there don't smash it up. With KATA's ABS you have protection you can always get on board! This simple inflatable protective casing comes folded up in a compact pouch no larger than a book.
External Maximum Dimensions: 27.6" x 10.2" x 11.0"
Deflated External Dimensions: 7.9" x 3.1" x 7.1"
The KATA CB-100 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Sony HVR-A1 up to the Panasonic AG-DVC30, the Canon GL2 and XM2 and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap. The snuggly protected camcorder compartment is located beneath so when you are out and working the access to your accessories is rapid and immediate. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 13.8" x 8.9" x 8.9"
The KATA PR-440 Photo Reporter shoulder bag provides easy accessibility to your gear, keeping you ready to capture that split-second shot. The PR-440 fits 1-2 digital SLR bodies and 3-4 lenses (up to 300mm) plus accessories. Customize the internal compartment with the modular dividers while an internal removable pad lets you define the rigidity of the bag, allowing you to either leave in for a more protective bag or to take out to make the bag more compactness in tight situations. A top access opening allows you to easily reach your equipment from the top of the bag without having to open the entire bag. The quick release buckle lets you easily access all your gear within the bag. The provided elements cover easily fits over the bag to protect in rainy situations with the black side and in extreme sunny situations with the silver side to keep the bag cool.
Internal Main Compartment Dimensions: 11.4" x 6.3" x 7.9"
The KATA PR-420 Photo Reporter shoulder bag was created for the reporter on the move, ready to grab and go at any moment. It provides easy accessibility to your gear, keeping you ready to capture that split-second shot. The PR-420 fits 1-2 digital SLR bodies and 2-3 lenses (up to 200mm) plus accessories. Customize the internal compartment with the modular dividers while an internal removable pad lets you define the rigidity of the bag, allowing you to either leave in for a more protective bag or to take out to make the bag more compactness in tight situations. A top access opening allows you to easily reach your equipment from the top of the bag without having to open the entire bag. The quick release buckle lets you easily access all your gear within the bag.
Internal Main Compartment Dimensions: 10.2" x 6.3" x 7.9"
The KATA CC-195 Camera Shoulder Case is a compact, TST padded case that fits camcorders up to the size of the JVC GY-HD100U and Canon XL HD1. The CC-195 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF). Accessories will fit in the remaining space of the main compartment, the additional long compartment or the full-length external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. The CC-195 lid is secured by a wide "hook & loop" fastener and a side-release buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the BSS Shoulder Strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 22.8" x 10.2" x 11"
The KATA CC-193 Camera Shoulder Case is a compact, padded, TST case designed to hold a range of small digital camcorders or a digital SLR with tele lens and hood attached. The CC-193 will hold the Sony HDV-Z1 and HDV-FX1 Hi-Def camcorders, the Sony PD170 and Panasonic DVX100A and similar. Accessories will fit in the remaining space of the main compartment, the additional long compartment or the full-length external pocket. Internal dividers are included and, if additional division is desired, Kata's Modi-Vers Kits are available. The CC-193 lid is secured by a wide "hook & loop" fastener and a side release buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying solutions include KATA's BSS Shoulder Strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 21.2" x 8.6" x 10.2"
The KATA D-Light Capsule-183 DL is stylish, functional lightweight, protective case which is designed to carry camcorders such as the Panasonic AG-HVX200, AG-HPX170 and AG-HMC150, the Canon XH A1s and XH G1s, the Sony HVR-V1, HVR-Z1, HVR-Z5, HVR-Z7 and similar. A TST RIB running down the middle of the bag and an Aluminum Skeleton stave which arcs across the mid section provide structural protection while light yet durable RipStop fabrics, Honeycomb Panels and Aeriform foams join together to create a lightweight protective compact case. The included Lens Pillow fits snugly under your lens to perfectly stabilize your camcorder. A Rain Cover is also included for protection in rough weather conditions. Carrying options include an interconnected 3 handle and 1 shoulder strap system, while Insertrolley connection is available for wheel-along transportation (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 16.5" x 9.8" x 8.3"
The CC-192 is a compact, TST padded case designed to hold a range of consumer and prosumer Mini DV and HDV camcorders such as the Sony V1, the Panasonic DVX 100 and HVX 200, the Canon XH G1 and XH A1, ans the JVC HD1U. Additional accessories will fit in the remaining space of the main compartment, and the additional full-length interior compartment or the full-length external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. The CC-192 lid is secured by a quick closure buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the supplied padded shoulder strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 19.7" x 7.8" x 7.8"
The KATA CC-191 Camera Shoulder Case is a smaller version of the KATA CC-193 designed to hold a range of small digital camcorders or a digital SLR with tele lens and hood attached. The CC-191 will hold the Canon GL2, XM2, Panasonic DVC30, Sony PDX10 and similar camcorders. Accessories will fit in the remaining space of the main compartment, the additional long compartment or the full-length external pocket. Internal dividers are included and, if additional division is desired, Kata's Modi-Vers Kits are available. The CC-193 lid is secured by a wide "hook & loop" fastener and a side release buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying solutions include KATA's BSS Shoulder Strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 11.8" x 8.7" x 7.1"
The KATA ABS-HDV Air Bag System is the perfect protective solution for globe trotting camcorders and cameramen. Forget about fighting to get your camcorder bag on board with you, Say farewell to the days of wrapping up your camcorder in blankets and hoping that the other suitcases up there don't smash it up. With KATA's ABS you have protection you can always get on board! This simple inflatable protective casing comes folded up in a compact pouch no larger than a book.
External Maximum Dimensions: 17.3" x 10.2" x 11.0"
Deflated External Dimensions: 7.9" x 3.1" x 4.7"
The KATA D-Light Capsule-181 DL is stylish, functional lightweight, protective case which is designed to carry camcorders such as the Panasonic AG-HMC40, the Canon GL2, the Sony HVR-A1 and similar. A TST RIB running down the middle of the bag and an Aluminum Skeleton stave which arcs across the mid section provide structural protection while light yet durable RipStop fabrics, Honeycomb Panels and Aeriform foams join together to create a lightweight protective compact case. The included Lens Pillow fits snugly under your lens to perfectly stabilize your camcorder. A Rain Cover is also included for protection in rough weather conditions. Carrying options include an interconnected 3 handle and 1 shoulder strap system, while Insertrolley connection is available for wheel-along transportation (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 16.5" x 9.8" x 8.3"
The KATA D-Light Hybrid-537 DL will carry and protect both your still camera and your video camcorder in a single bag that can be split in two when desired. A TST RIB running down the middle of one of the components provides structural protection while light yet durable RipStop fabrics and foams join together to create a lightweight protective compact case, perfect for everyday use. The bag consists of two pouches and each can hold a variety of gear. The larger pouch will hold a Digital SLR with an additional lens or flash plus some small accessories or a small HDV camcorder, while the smaller pouch will carry one of the following: a compact HDV camcorder, a bridge camera or a compact Digital SLR. An external Elasto-Guard pocket on each pouch is useful to store small accessories you need close at hand. Tripod connecting straps can be attached to the large pouch or to the combined bag when both components are interconnected.
Large Pouch Internal Dimensions: 8.3" x 5.1" x 7.9"
Small Pouch Internal Dimensions: 5.1" x 3.9" x 7.9"
KATA's Digital Bag DB-455, part of the Digital Photo Series (DPS), is a satchel type bag which features unique TST RIB structural protection, a designated padded laptop compartment and a Digital SLR or camcorder camera insert. This bag is great for everyday use also when not carrying a camera as the spacious main compartment can be used with or without the camera insert. When not shooting, take the camera insert out to use the bag as an everyday pack. Additional storage options include a large external pocket which allows quick zippered access to the essentials stored in the organizer panel within, and two flexible Elasto-Guard side pockets for water bottles and more. The DB-455 features a designated laptop compartment to hold and protect up to a 15-inch laptop.
Internal Main Compartment Dimensions: 13.4" x 6.5" x 11.2"
The KATA D-Light Hybrid-531 DL will carry and protect both your still camera and your video camcorder in a single bag that can be split in two when desired. A TST RIB running down the middle of one of the components provides structural protection while light yet durable RipStop fabrics and foams join together to create a lightweight protective compact case, perfect for everyday use. The bag consists of two similarly-sized pouches and each can hold a variety of gear. One pouch will hold a compqact Digital SLR or bridge camera, while the other pouch will store a compact HDV camcorder. Both are equipped with an internal accessory pocket and a horizontal divider under which cables can be stored. When the dividers are not in use they fold against the inner wall, allowing you full use of the space. An external Elasto-Guard pocket on each pouch is useful to store small accessories you need close at hand. Tripod connecting straps can be attached to the large pouch or to the combined bag when both components are interconnected.
Pouch 1 Internal Dimensions: 3.9" x 3.9" x 6.9"
Pouch 2 Internal Dimensions: 3.9" x 3.9" x 6.9"
KATA's Digital Bag DB-453, part of the Digital Photo Series (DPS), is a satchel type bag which features unique TST RIB structural protection, a designated padded laptop compartment and a Digital SLR or camcorder camera insert. This bag is great for everyday use also when not carrying a camera as the spacious main compartment can be used with or without the camera insert. When not shooting, take the camera insert out to use the bag as an everyday pack. Additional storage options include a large external pocket which allows quick zippered access to the essentials stored in the organizer panel within, and two flexible Elasto-Guard side pockets for water bottles and more.
Internal Main Compartment Dimensions: 11.2" x 5.3" x 9.3"
|
Email Us