Azden WL/T-PRO Professional Videography VHF Wireless Beltpack Transmitter Get Azden WL/T-PRO Price / Buy Online 169.445 and 170.245 MHz Get Azden WL/T-PRO(S) Price / Buy Online 171.105 and 171.845 MHz

Shop our online store Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

Beltpack transmitter (WM-PRO) with electret condenser omni-directional lavalier microphone (EX-503). 2 channel switchable. Uses 9V alkaline battery.

This professional wireless lapel microphone is the same microphone and transmitter that comes with the WLXPRO system, but does not come with a receiver. It can be used with the receiver from any "PRO" series kit, the Azden WR-PRO Receiver, the Azden WDR-PRO True Diversity Wireless Receiver or the Azden WR22PRO 2-Channel Receiver.

The incredible success of the PRO Series among professional videographers has prompted Azden to add 2 additional frequencies, 171.105 and 171.845, to the most popular professional models, the WR-PRO, WDR-PRO and WDR-PRO receivers and the associated WL/T-PRO, WM/T-PRO, and the WX/T-PRO transmitters. These additiional VHF frequencies will not interfere with Azden's long-established 169.445 and 170.245MHz models. If you wish to use the two new frequencies, order the WL/T-PRO(S) model. Please be sure your receiver is also the (S) model - WR-PRO(S), WDR-PRO(S), WR22-PRO(S). Please note that the PRO Series microphone/receiver complete kits only come in the two original frequencies. If you wish to use the WL/T-PRO with the receiver from one of these kits, please be sure to order the original WL/T PRO (not the S model).

Azden WM-PRO Beltpack Transmitter Key Features

Compact and Unobtrusive Transmitter Unit With Belt Clip

The WM-PRO transmitter comes with a belt clip. It is small enough to also be tucked into a jacket or pants pocket.

No External Antenna Needed

The lapel mic's cord discretely doubles as the transmitter's antenna.

Power/Frequency Selector Switch

The WM-PRO operates on the low-interference VHF band and has two switchable frequencies: (F1) and (F2). A slide switch is used to turn the system on/off and select a frequency.

WL/T-PRO: F1 - 169.445MHz, F2 - 170.245MHz
WL/T-PRO(S): F1 - 171.105MHz, F2 - 171.845MHz

Azden WM-PRO Beltpack Transmitter Specifications

Transmission Frequency:

WL/T-PRO: F1 - 169.445MHz, F2 - 170.245MHz
WL/T-PRO(S): F1 - 171.105MHz, F2 - 171.845MHz

Modulation System:

FM Modulation

Modulation Sensitivity:

94dB SPL at ± 2.5kHz Dev

Battery:

One 9v (not included)

Power Consumption:

30mA

Dimensions (H x W x D):

86mm x 60mm x 21.5mm - (3.4" x 2.4" x .84")

Weight:

98g with Battery - (3.4 oz)

Included Microphone:

Omni Lavalier Electret Condenser (EX503)

Back to Azden PRO Series Videography VHF Wireless