Azden APS 25-UH1 Powered Speaker System With 2 10HT UHF Transmitters Get Azden APS 25-UH1 Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

The Azden APS 25-UH1 comes with the APS 25 Powered Speaker, one installed APS-UR Modular Plug-in UHF Receiver and one Azden 10HT UHF Wireless Handheld Microphone/Transmitter. The second available receiver slot is left open, either for future expansion or for a different type of receiver module and/or transmitter. For example, you can add a second APS-UR UHF receiver module and a 51XT UHF XLR Plug-in transmitter or a 31LT UHF Lapel Microphone/Transmitter. Or you can add an APS-VR VHF receiver module and any compatible VHF microphone/receiver.

Azden designed their APS 25-UH1 powered speaker system to be as versatile as possible: wireless or wired, expandable, wall or stand-mounted, and built for absolute reliability -- so you could cover the broadest spectrum of audio installations. Take advantage of the APS 25-UH1's unlimited possibilities on your next install.

Unlike the entry-level models of its competitors, which have 1, 2, 10 or 16 channels, the 10HT UHF Transmitter offers 63 user-selectable channels in the 794-806MHz band. The Azden 10HT features a handheld microphone perfect for vocal applications. The transmitter is built into the mike housing, therefore requiring no dangling wires.

The 10HT will work flawlessly with the installed Azden APS-UR modular plug-in UHF receiver, which also features 63 on-board user selectable UHF frequencies.

Azden APS 25 Powered Speaker System

Azden APS 25 Key Features

Included Accessories

• Removable wall-mount bracket
• Removable right-angle AC cord
• 4 anti-skid pads
• One installed APS-UR Modular Plug-in UHF Receiver

Exceptional Sound

Incorporating a 20 watt amplifier, the APS 25-UH1 is a rugged, 2-way speaker with a 5.25 in. shielded woofer and a 1 in. wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.

Two User-Installable Wireless Module Slots

Only the APS 25-UH1 offers you the ability to include VHF, UHF, or Infrared wireless microphone modules. And, you can use either one or two modules, initially or later on. So you can order the speaker in any number of configurations and add to it in the future. Since Azden offers a choice of 30 VHF frequency modules, their 63 channel user-selectable UHF modules, or Infrared wireless, you can have multiple systems in one venue without interference. The Azden APS 25-UH1 comes with one APS-UR Modular Plug-in UHF Receiver installed in one slot. The second available receiver slot is left open, either for future expansion or for a different type of receiver module and/or transmitter.

More Control, More Inputs, More Possibilities

The APS 25-UH1 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs -- two wireless, one wired mic level, and one line level -- giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.

Signal-Sensing Auto-On Circuit

Included Auto On-Off circuitry triggered by any audio input signal for hands-off system startup.

High-Impact Injection-Molded ABS Case

Azden includes a high impact case for reliability.

115 / 220V AC User-Switchable

Dual-voltage (110/220V) switching to facilitate installation and use.

Multiple Mounting Options

The APS 25-UH1 can be used free standing, stand-mounted, or wall-mounted with the supplied U-mount bracket. For easier wall mounting, Azden includes a removable 90-degree-angle AC cable.

4 Inputs With Independent Volume Control

Master Volume Control

Anti-Feedback Tone Control

Table, Stand or Wall Mountable

Magnetically Shield Woofer

Wide Dispersion Tweeter

Two-Year Warranty

Azden APS 25 Specifications

Rated Power

20 watts continuous

Frequency Response

65Hz - 18kHz

Max SPL at rated output

101dB @ 1 meter

Woofer

5.25" (133.35mm) high efficiency - magnetically shielded

Tweeter

1" (25mm) dome

Crossover

1st order passive @ 8kHz

Tone Control

-6dB/octave sliding lowpass (3kHz to 8kHz)

Wireless inputs

2 user-installable receivers
VHF (169-213MHz), UHF (794-806MHz) and/or Infrared

Wired inputs/output

• Mic: -81dBV (0.089mVRMS) for 1 watt
  100Kohm unbalanced, ¼" phone jack, variable
• Line: -40dBV (10mVRMS) for 1 watt
  10Kohm unbalanced, RCA jack, variable
• Line-Out: +15dBV max - RCA jack

Weight

8.25 lb (3.74kg) approx. without receivers

Dimensions (H x W x D)

12.4" x 7.09" x 5.6" (315 x 180 x 142mm)

Compliance

UL, C-UL, and FCC approved

AC Power Requirements

User switchable: 110-125 / 210-240VAC - 50Hz / 60Hz

Azden 10HT Wireless Handheld Microphone/Transmitter Key Features

Ideal For Vocal Applications

This handheld mic features an electric-condenser unidirectional microphone element. The transmitter is built into the mike housing, therefore requiring no dangling wires.

Reduced Handling Noise

The 10HT mic features Azden's special surface coating which reduces handling noise.

63 User-Selectable Frequencies

The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz). The 10HT is designed with low-noise PLL circuitry.

Operates on Two AA Batteries

The microphone uses two AA alkaline batteries to operate for eight-plus hours.

Dimensions (Length x Circumference):

9" x 1.73" (230 x 44 mm)

Back to Azden Powered Speaker Systems