Azden APS 25-RH2 Powered Speaker System With Two IRH-10 Infrared Transmitters Get Azden APS 25-RH2 Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

The Azden APS 25-RH2 comes complete with the APS 25 Powered Speaker, two installed APS-IRII Modular Plug-in Infrared Receivers, one IRB-30 External Sensor and two Azden IRH-10 Infrared Wireless Handheld Microphone/Transmitters. Azden designed their APS 25 powered speaker system to be as versatile as possible: wireless or wired, expandable, wall or stand-mounted, and built for absolute reliability -- so you could cover the broadest spectrum of audio installations. Take advantage of the APS 25's unlimited possibilities on your next install.

The Azden IRH-10 is a handheld microphone/two-channel transmitter great for vocal applications and pass-around. Multiple emitters around the base and near the mic element flood the room. An anti-roll ring around the mic head keeps the IRH-10 from rolling off a sloping lectern or school desk. In the real world, the ability to use multiple systems in the same location without frequency interference will prove to be a tremendous benefit to you. Using infrared means that the audio generated in your room stays in your room. Your discussions cannot be overheard on other systems in other rooms. Designed by professionals - for professionals, Azden "RED" will provide you with years of worry-free, high-quality performance.

The IRH-10 will work flawlessly with the installed Azden APS-IRII modular plug-in Infrared receivers, which also feature two on-board user selectable Infrared frequencies. To increase the working range of the system, an external sensor can be added. The included IRD-30 sensor is powered by the receiver and can be plugged into the external sensor input on the rear panel. With an external sensor attached, if the front panel sensor is blocked (perhaps in a secured cabinet or closet) the external sensor will still pick up the signal.

Azden APS 25 Powered Speaker System

Azden APS 25 Key Features

Included Accessories

• Removable wall-mount bracket
• Removable right-angle AC cord
• 4 self-adhesive anti-skid pads
• Two installed APS-IRII Modular Plug-in Infrared Receivers

Exceptional Sound

Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25 in. shielded woofer and a 1 in. wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.

Two User-Installable Wireless Module Slots

Only the APS 25 offers you the ability to include VHF, UHF, or Infrared wireless microphone modules. And, you can use either one or two modules, initially or later on. So you can order the speaker in any number of configurations and add to it in the future. Since Azden offers a choice of 30 VHF frequency modules, their 63 channel user-selectable UHF modules, or Infrared wireless, you can have multiple systems in one venue without interference.

More Control, More Inputs, More Possibilities

The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs -- two wireless, one wired mic level, and one line level -- giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.

Signal-Sensing Auto-On Circuit

Included Auto On-Off circuitry triggered by any audio input signal for hands-off system startup.

High-Impact Injection-Molded ABS Case

Azden includes a high impact case for reliability.

115 / 220V AC User-Switchable

Dual-voltage (110/220V) switching to facilitate installation and use.

Multiple Mounting Options

The APS 25 can be used free standing, stand-mounted, or wall-mounted with the supplied U-mount bracket. For easier wall mounting, Azden includes a removable 90-degree-angle AC cable.

4 Inputs With Independent Volume Control

Master Volume Control

Anti-Feedback Tone Control

Table, Stand or Wall Mountable

Magnetically Shield Woofer

Wide Dispersion Tweeter

Two-Year Warranty

Azden APS 25 Specifications

Rated Power

20 watts continuous

Frequency Response

65Hz - 18kHz

Max SPL at rated output

101dB @ 1 meter

Woofer

5.25" (133.35mm) high efficiency - magnetically shielded

Tweeter

1" (25mm) dome

Crossover

1st order passive @ 8kHz

Tone Control

-6dB/octave sliding lowpass (3kHz to 8kHz)

Wireless inputs

2 user-installable receivers
VHF (169-213MHz), UHF (794-806MHz) and/or Infrared

Wired inputs/output

• Mic: -81dBV (0.089mVRMS) for 1 watt
  100Kohm unbalanced, ¼" phone jack, variable
• Line: -40dBV (10mVRMS) for 1 watt
  10Kohm unbalanced, RCA jack, variable
• Line-Out: +15dBV max - RCA jack

Weight

8.25 lb (3.74kg) approx. without receivers

Dimensions (H x W x D)

12.4" x 7.09" x 5.6" (315 x 180 x 142mm)

Compliance

UL, C-UL, and FCC approved

AC Power Requirements

User switchable: 110-125 / 210-240VAC - 50Hz / 60Hz

Azden IRH-10 Infrared Wireless Handheld Microphone/Transmitter

Azden IRH-10 Key Features

Infrared Wireless Transmitter

For over 40 years Azden Corporation has been creating technologically advanced products. Azden "RED" represents a breakthrough in wireless. Instead of the normal radio waves that other wireless systems use, Azden "RED" uses invisible light beams in the infrared range. Through the use of infrared you will no longer be plagued by outside interference. "RED's" enhanced performance assures you of the finest in audio clarity and reliability. The specially selected high-frequencies provide you with trouble free performance, even in fluorescently lit rooms. Like all infrared, Azden "RED" will not operate correctly outside in the sunlight.

In the real world, the ability to use multiple systems in the same location without frequency interference will prove to be a tremendous benefit to you. Using infrared means that the audio generated in your room stays in your room. Your discussions cannot be overheard on other systems in other rooms. Designed by professionals - for professionals, Azden "RED" will provide you with years of worry-free, high-quality performance.

Handheld Microphone/Two-Channel Transmitter Great For Vocal Applications And Pass-Around

The Azden IRH-10 is a handheld microphone/two-channel transmitter great for vocal applications and pass-around. Multiple emitters around the base and near the mic element flood the room.

Complete Freedom of Movement in a 2500 Sqare Foot Room

An emitter array at the base of the microphone/transmitter allows complete freedom of movement in a 2500 sqare foot room.

Two User-Selectable Infrared Frequencies

The IRH-10 can be set to transmit on either one of two preset frequencies. This allows two different speakers to talk at the same time in the same room.

Anti-Roll Ring

An anti-roll ring around the mic head keeps the IRH-10 from rolling off a sloping lectern or school desk.

Power / Low Battery LED

The Power LED on the mic above the power switch will glow green when the switch is turned on. The LED will turn from green to red to indicate 'Low Battery'.

Runs On Two AA Batteries

The microphone uses two AA alkaline batteries to operate for five hours.

Azden IRH-10 Specifications

Sub-Carrier Frequencies

2.06MHz and 2.56MHz switchable

Modulation

FM

Audio Distortion

< 1.0% (±15kHz deviation @ 1kHz)

Microphone Element Type

uni-directional dynamic

Battery Type

Two AA alkaline (2 x 1.5V)

Battery Life (260mA Drain)

> 10 hours w/alkaline batteries

Dimensions (Length x Diameter)

10.04 x 2.28 inches (255 x 58mm)

Weight

9.1 oz. (258g) with batteries

Back to Azden Powered Speaker Systems